Product news
Multi-membrane cable entry plates for extreme conditions
15/09/2025
The KEL-DPU-OD is ideally suited for applications in which cable entry components are permanently exposed to strong UV radiation, weathering and temperature fluctuations. Compared to standard versions, it offers increased material resistance and extended service life in outdoor environments.
IMAS-CONNECT™ Adapter grommets for industrial connectors 3A or 4A
15/09/2025
The AT-HA grommet is part of the IMAS-CONNECT™ modular adapter system and for the first time enables the direct integration of 3A or 4A inserts into an adapter grommet – without the need for an additional cut-out. In combination with the 3A or 4A insert sets and matching connector housings with M20 or M25 cable glands, the AT-HA grommet offers a compact, efficient and flexible solution for use in industrial applications.
New space-saving EMC cable clamps for 10 × 3 mm bus bar
20/05/2025
With this generation of shield clamps for the bus bar, the clamp sits directly above the bus bar. This saves space in the alignment direction of the electrical cables. Whenever a cable shielding is required with the possibility of earthing, EMC shield clamps can be used. Shield clamps are easy to use and effective in dissipating conducted disturbances.
KEL-DPFR multi-range cable entry plates with pyramid-shaped membranes
03/03/2025
The KEL-DPFR cable entry plates make it possible to insert several cables with different diameters from 3 to 28 mm and seal them in accordance with up to IP66. A great benefit when the exact cable diameter is not known in advance. Due to the flexibility and unique pyramid shape of the membranes, routing and flexible positioning of rigid cables is much easier compared to using conventional cable glands.
Split cable entry frame with Han 3A / Han 4A connection
19/11/2024
The modular interface system (MIS) is a split cable entry for cables with and without connectors in combination with industrial connectors 3A or 4A. An industrial connector of size 3A or 4A can be plugged directly onto the frame. Cables with a diameter of 1 to 15 mm can be routed, sealed and strain relieved in accordance with EN 62444.
KEL-DPR multi-membrane cable entry plates with high cable density
21/10/2024
The KEL-DPR 24 cable entry plate is based on the proven KEL-DP 24, but has an integrated polypropylene reinforcement frame. With the KEL-DPR 24, up to 48 cables from 1 to 16.1 mm can be inserted in the smallest of spaces and sealed in accordance with IP65. The KEL-DPR also allows the cables to be routed through the backside of the plate.
Modular stackable cable clamp / cable cleat for cable diameters 10 - 55 mm
08/10/2024
The modular stackable cable clamp MSMC is used for easy, quick and secure fastening of cables, pipes and other cylindrical components. The variable clamping range is up to 16 mm. The great advantage of this cable cleat is that it can be easily extended by stacking or baying.
Cover panels for thread extensions & cable entry systems
03/09/2024
Core drills with diameters from 80 mm are very often used to make wall openings in cleanrooms, cold rooms, buildings, etc. In order to be able to use the TE thread extensions, metric cable entry plates & split cable glands for such wall openings, the AB-M cover panels are used.
New hook-and-loop tape holder variants provide quick and tool-free installation
14/05/2024
The icotek "KBH" hook-and-loop tape holders are used to fix icotek hook-and-loop tapes and cable ties. Numerous product variants offer a wide range of mounting and cable routing options. The range of hook-and-loop tape holders has recently been expanded to include additional variants that allow the user quick and tool-free installation.
Split U-shaped cable grommet for cables with connectors
09/04/2024
The UT cable grommet is an U-shaped cable bushing and makes it possible to route single pre-connectorised cables as well as standard cables with a diameter range of 4 to 11 mm into enclosures. The wall thickness of the enclosure can be from 1 to 4 mm.
IMAS-CONNECT™ adapter grommet for Keystone jacks now available with protection cover
12/03/2024
With the IMAS-CONNECT™ adapter grommet system, you can easily use your split cable entry as an individual interface for connectors. There is no need for a separate cut-out for keystone jacks, circular connectors, etc. This reduces not only the installation time, but also the space required on the mounting surface. If a pre-assembled Keystone jack is not used directly, the protection cover with integrated seal offers reliable protection against splash water and dust.
Expansion of the KEL-DPZ-KX/KL cable entry plate series
26/02/2024
The KEL-DPZ-KX/KL cable entry plate, designed for Rittal KX and KL enclosures, has been expanded with five new configurations. By mounting the KEL-DPZ-KX/KL cable entry plate on the Rittal KX or KL enclosure (instead of the Rittal flange plate), a cable entry for a large number of cables with different diameters can be created in a very short time.
Split bulkhead for 90° cable entry
23/10/2023
The new bulkhead KEL-FW is perfect for routing cables at a 90° angle over a large bending radius (max. 150 mm). Cables with and without connectors up to a diameter of 35 mm can be routed and strain-relieved according to EN 62444. Retrofitting and maintenance can be carried out quickly and easily.
Split cable entry system for food tech applications
26/09/2023
The KEL-ER-BL is a split cable entry system for cables with and without connectors. The KEL-ER-BL in the signal colour blue is preferably used in the area of food packaging and processing machines where there is no direct contact with food.
Brush strips for 10" and 19" server racks
01/09/2023
This brush strip from icotek is suitable for installation in 10" or 19" server racks from various manufacturers. The special feature of the BES brush strip is that the integrated spring locks allow tool-free assembly and disassembly. All that is needed is to release the locking mechanism on both sides.
Punches for CONFiX™ bulkhead fittings
03/07/2023
These punches can be used to punch the special cutout shapes for the CONFiX™ bulkhead fittings. For max. 2 mm stainless steel (V2A versions), sheet steel, aluminium and plastic. The punches are suitable for the hand hydraulic punch driver and the hydraulic foot pump.
Efficient LED lighting for industry and automation
04/04/2023
The ALLIOLiGHT system luminaires provide effective lighting in enclosures for industrial and IT applications. Over 30 years of experience in the field of luminaires and accessories as well as renowned customers from all over the world guarantee the highest quality – made in Germany.
