EMC-KVT-DS | Split EMC cable gland
for shielding cables with connectors, thread size M32/M63 / IP55
The split cable gland EMC-KVT-DS is based on the standard icotek KVT product. However, the EMC-KVT-DS has been metallised (galvanise coated) to create a conductive surface.
The first cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The second grommet (EMC-KT) contacts the cable shield at a full 360 degrees.
The conductive flat gasket included in the scope of delivery makes contact between the cable gland and the conductive housing wall. The EMC-KVT-DS can thus be fixed using a plastic lock nut. Alternatively, an additional contact to the metal wall can be made using a special EMC lock nut.
Part No.
99432
Specifications
IP rating
IP55, IP54
Zertifikate
REACH, Made in Germany, RINA, EMV, RoHS
Thread
M32 × 1,5
Temperaturbereich Range Max
90 C°
Flame class
UL94-HB
Mounting options
Fasten with locknut
Temperaturbereich Range Min
-40 C°
Advantages and benefits
Both conducted and field-bound disturbances can be reliably diverted
Scratch-resistant surface
Contacting the cable shield over 360°
EMC grommets made entirely from conductive elastomer
Very good dissipation values
Very good shielding effect with regard to EMC tightness
Product variants and sizes
EMC-KVT-DS 32 with EMC locknut
Number
99432
EAN
4251269322662
Packaging Unit
Unknown
IP rating
IP55, IP54
EMC-KVT-DS 32 with plastic locknut
Number
99431
EAN
4251269321962
Packaging Unit
Unknown
IP rating
IP55, IP54
The split cable gland EMC-KVT-DS is based on the standard icotek KVT product. However, the EMC-KVT-DS has been metallised (galvanise coated) to create a conductive surface.
The first cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The second grommet (EMC-KT) contacts the cable shield at a full 360 degrees.
The conductive flat gasket included in the scope of delivery makes contact between the cable gland and the conductive housing wall. The EMC-KVT-DS can thus be fixed using a plastic lock nut. Alternatively, an additional contact to the metal wall can be made using a special EMC lock nut.