KEL-EMC-PF cable assembly bracket
for mounting individual shield clamps
The EMC bracket combined with the matching PFS EMC shield clamp is perfect in conjunction with the KEL cable entry frame for alleviating interferences due to shields.
The EMC clamp is assembled inside the control panel. For this process the fixing screws for the assembly of the KEL frame on the panel are used. A female screw thread M5 is already integrated in the KEL-EMC-PF bracket.
The KDR-EMC-PFM type can be mounted on icotek enclosure base plates with slide frames KDR-ESR-VX25.
Depending on the cable diameter, the corresponding PFS shield clamp can be snapped onto the EMC bracket.
Part No.
39184
Specifications
Zertifikate
REACH, EMV, RoHS
Length
60 mm
Mounting options
Screw type mounting
Mounting location
Kabeleinführungen, Metal sheets
Advantages and benefits
Large surface contact between cable shield and housing, especially on conductive coated surfaces
Easily combines cable routing, EMC and strain relief due to the use of the same mounting holes
M5 Mounting hole for earthing tape or PE connection
Direct, easy and quick contact to the enclosure
Designed for high density applications
Replacement for EMC cable glands, even for pre-terminated cables
Product variants and sizes
KEL-EMC-PFM 16
Number
39183
EAN
4251269318344
Packaging Unit
Unknown
Zertifikate
REACH, EMV, RoHS
KEL-EMC-PFM 10
Number
39184
EAN
4251269318351
Packaging Unit
Unknown
Zertifikate
REACH, EMV, RoHS
KEL-EMC-PFM 24
Number
39181
EAN
4251269318368
Packaging Unit
Unknown
Zertifikate
REACH, EMV, RoHS
The EMC bracket combined with the matching PFS EMC shield clamp is perfect in conjunction with the KEL cable entry frame for alleviating interferences due to shields.
The EMC clamp is assembled inside the control panel. For this process the fixing screws for the assembly of the KEL frame on the panel are used. A female screw thread M5 is already integrated in the KEL-EMC-PF bracket.
The KDR-EMC-PFM type can be mounted on icotek enclosure base plates with slide frames KDR-ESR-VX25.
Depending on the cable diameter, the corresponding PFS shield clamp can be snapped onto the EMC bracket.